Orbitsound BAR A70 Quick Start Manual

C O N N E C T I N G Y O U R B A R A 7 0
1 ) C O N N E C T P O W E R
Connect power to the rear of your soundbar
(1) and subwoofer (2). Switch on the
subwoofer power (3).
TV OPTICAL
AUDIO OUT
1
BAR A70
Q U I C K S TA R T G U I D E
2 ) C O N N E C T Y O U R T V
Connect your TV using the optical cable included,
Make sure to remove the protective caps on each end
of the cable before plugging the cable in. Connect
the optical cable (4) to your TV and soundbar.
4
5
1
T H A N K Y O U F O R C H O O S I N G O R B I T S O U N D
This guide is all you need to set up your
ORBITSOUND BAR A70 to start enjoying natural and
immersive room filling airSOUND™.
a i r S O U N D ™ S P E A K E R S
NFC Tag
T O U C H PA N E L B U T T O N S
Input Source
Remote Control Learning
Bluetooth (Hold to pair)
Volume +
Volume -
Power / Standby
N O O P T I C A L O N T V ?
If your TV doesn't have an optical socket,
connect using the 3.5mm AUX cable
supplied to the audio out of your TV and
the AUX input (5) on the soundbar.
You can table or wall mount your soundbar with the
included fixings. Please ensure the centre speakers
and side airSOUND speakers are free from obstacles
within 10cm to ensure the best sound.
Centre Speakers Remote Receiver Display
Remote Learning
Wireless Subwoofer Error/Pairing
Volume/Bass/Treble
Optical Source
Bluetooth Source
AUX Source
Power/Mute
3
Subwoofer Pairing:
1) Long Press
subwoofer PAIR;
STATUS will flash
2) Long Press
soundbar Vol+ and Vol-
©2014 Orbitsound ltd.
2