Warranty Terms Making a Warranty Claim You will be advised by the Agent on the action that will be taken and any costs payable, subject to the conditions of this warranty. Orbitsound Ltd Warranty Terms and Conditions FCC Statement: WARNINGS Specifications...
This instruction booklet covers important safety and setup information as well as advice on how to get the most out of your orbitsound M12. Orbitsound contact information ORBITSOUND LTD.
BLUE: On OFF: Power off IR receiver The orbitsound M12 soundbar produces most of the sound that you hear. It produces the main signal and spatial information that combine in your listening area to create a panorama of sound. Remote control...
Control panel overview The soundbar can be controlled from the control panel: Optical Bluetooth 1. Source: Press to cycle through the inputs. This controls which connected device is playing through the soundbar. 2. Bluetooth: Short press to renew a Bluetooth connection / start playback. Long press (Press and hold) to enter pairing mode.
Page 9
2) (OPTION) If your TV does not have an optical output: Use the included analogue cable to connect the audio output from your TV to the soundbar. Note: Some TVs may only have a 3.5mm jack output, you can also use this output.
The Bluetooth source light will flash quickly to show that pairing mode has started. Look on your device for ‘Orbitsound’ in the Bluetooth device list, and pair with it. When a device is paired, the soundbar Bluetooth source light will change to solid blue.
Remote control The control panel functions can also be done from the remote control: Source Changes the input source Volume + / - Controls volume Power Enter standby / resume Change tone: Bass and treble controls the sound: TREB BASS TREB Note: Treble changes the sound of the soundbar + / - 5 steps.
Advanced Setup & Use The orbitsound M12 is easy to set up and enjoy, but even better sound may be achieved by following these guidelines. Positioning - getting the most from spatial sound The spatial sound field is produced by the speakers in the sides of the soundbar.
Wireless The Orbitsound wireless system is uniquely developed to deliver the best possible listening experience in terms of minimal delay, and maximum sound fidelity. The system uses a digital 2.4GHz signal, similar to that used by computer WiFi systems.
Other features Power saving The M12 features a super low power state with wireless subwoofer low-power control. When the soundbar enters standby mode, the power consumption reduces. It is recommended that Users routinely use standby mode as this also shuts down the wireless subwoofer.
Auto-mute If there is no signal, or extremely low input signal, the soundbar will enter auto- mute mode. This reduces power consumption, and also completely silences the soundbar and subwoofer. Bluetooth resume / grab If you have previously paired your phone/tablet, there is no need to re-pair the device.
Adjust the volume of the soundbar until sound is heard. • Increase the volume of the playback device. The M12 features an energy saving mode that cuts the power to the amplifiers when there is no signal for a long time.
Check the output format of the optical signal from the playing device. Choose ‘normal’ or ‘PCM’ format. Refer to the TV manufacturer’s handbook for more information. You can also contact Orbitsound for advice, see contact help line in this handbook and on the packaging.
Orbitsound Warranty This Orbitsound product is supplied with a 24 month limited manufacturer’s warranty dated from new purchase date. This warranty covers repairs or replacement that may be required in the event of Product failure during normal use, subject to the terms and conditions stated below and at the Agent’s discretion. ...
In all warranty cases, supplied handbook instructions. The warranty will not please refer to the support pages of www.orbitsound. cover repairs or replacements arising from misuse or com first.
11. Only use attachments/accessories specified by Danger of explosion if battery is incorrectly replaced. Orbitsound. Replace only with the same equivalent type. 12. Unplug this apparatus during lightning storms or when unused for long periods of time to prevent This equipment is a Class II or double damage to this product.
Stereo Line level -10dBu 3.5mm jack and RCA. TOSLINK optical digital input Bluetooth (wireless) Output(s) Orbitsound 2.4GHz audio Recommended placement Bar, in front of television Sub, floor, port facing room Dimensions (H x W x D) [mm] 90 x 600 x 100mm (soundbar)