Av Compu Link Remote Control System - JVC RX-1024VBK Instructions Manual

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and
DVD player) through the receiver.
CONNECTIONS:
To use this remote control system, you need to connect the video components you
want to operate, following the procedures below.
1. If you have already plugged your VCR1 (the VCR connected to the VCR 1
jacks), DVD player, TV, and this receiver into the AC outlets, unplug their AC
power cords first.
2. Connect your VCR1, DVD player, TV, and this receiver as follows, using the
cables with the monaural mini-plugs (not supplied).
VCR
DVD player
VHS
COMPU LINK
AV
COMPU LINK
IMPORTANT:
Connect to the terminal indicated in the
illustration.
DO NOT connect to the TV terminal.
3. Connect the audio input/output jacks on VCR1, DVD player, TV, and this
receiver using the cables with RCA pin plug (see pages 9 to 10) (and a digital
cable if you want — see page 11).
4. Connect the video input/output jacks on VCR1, DVD player, TV, and this
receiver as follows, using the cables with RCA pin plug or with S-video plug.
CASE1: If the components are equipped with the S-video
terminals
VIDEO
VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 1
MONITOR
OUT
CASE3: If only the VCR is equipped with the S-video
terminal.
TV
VIDEO
VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 1
MONITOR
OUT
To Video input 2
5. Plug the AC power cords of the components into the AC outlets.
6. When turning on the TV for the first time after the AV COMPU LINK
connection, turn the TV volume to the minimum using the TV volume control
on the TV.
DVD
AV
COMPU LINK
AV
DO NOT use these video terminals.
DVD player
S-VIDEO
DVD
VCR
S-VHS
DO NOT use these video terminals.
DVD player
S-VIDEO
DVD
VCR
S-VHS
TV
If the AV COMPU LINK terminal
on the TV is "RECEIVER/AMP"
COMPU LINK
RECEIVER/AMP
EX
(VCR)
If the AV COMPU LINK terminal
on the TV is "AV COMPU LINK
EX"
AV
COMPU LINK EX
CASE2: If the components are not equipped with the S-
video terminals
DO NOT use these video terminals.
DVD player
DVD
VCR
VHS
CASE4: If only the DVD player is equipped with the S-video
terminal.
DO NOT use these video terminals.
DVD player
DVD
VCR
VHS
CAUTION:
The AV COMPU LINK remote
control system cannot control
the DBS tuner connected to the
TV/DBS jacks, and video
components connected to the
VIDEO and VCR2 jacks on the
receiver.
Note:
When connecting either the VCR
AV
or DVD player to this receiver,
RECEIVER/
AMP connect it directly to the receiver
using cable with the monaural
mini-plugs.
VIDEO
VIDEO S-VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
MONITOR
OUT
VIDEO
VIDEO S-VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 2
MONITOR
OUT
To Video input 1
TV
To Video input 2
TV
56