JVC RX-1024VBK Instructions Manual page 33

4. Press BALANCE/SURROUND ADJUST repeatedly until
"DSP EFFECT" appears on the display.
The display changes to show the current setting.
5. Turn MULTI JOG to select the effect level, while the indication of
the previous step is still on the display.
As you turn it, the effect level changes as follows:
DSP EFFECT 1 DSP EFFECT 2
DSP EFFECT 5
As the number increases, the selected 3D-PHONIC mode
becomes stronger.
To cancel the 3D-PHONIC mode
Turn MULTI JOG until "DSP OFF" appears in step 3.
The 3D-PHONIC and DSP indicators go off from the display.
DSP EFFECT 3
DSP EFFECT 4
BALANCE/SURROUND
ADJUST
Note:
Once you have adjusted the 3D-
PHONIC modes, it is memorized
for each 3D-PHONIC mode.
MULTI JOG
30