Using The Sea Modes; Selecting Your Favorite Sea Mode - JVC RX-1024VBK Instructions Manual

Jvc audio/video control receiver instructions
Table of Contents

Advertisement

Using the SEA Modes

The SEA (Sound Effect Amplifier) modes give you control of the way your music sounds.
IMPORTANT:
When using the Remote Control, check to see if its remote control
AUDIO/
mode selector is set to the correct position:
TV/VCR
CATV
To operate this receiver, set it to "AUDIO/TV/VCR" (except when
DBS
selecting the DBS tuner as the source).

Selecting Your Favorite SEA Mode

On the front panel:
1. Press SEA MODE.
The display changes to show the current setting.
2. Turn MULTI JOG until the mode you want appears on the
display, while the indication of the previous step is still on
the display.
As you turn it, the SEA mode changes as follows:
SEA ROCK
SEA MUSICAL
SEA OFF
SEA USERMODE
SEA ROCK:
Gives a heavy sound. Both high and low frequencies are
boosted.
SEA MUSICAL:
Enhance the mid-frequency range, which the human voice is
mostly made up of.
SEA MOVIE:
Adds breadth to sounds so you feel like you are in a movie
theater.
SEA COUNTRY:
Enhances the high-frequency range so that instruments such
as the violin and banjo are emphasized.
SEA JAZZ:
Gives a feeling of a live atmosphere. Good for acoustic music.
SEA USERMODE: Your original SEA adjustment (see page 27).
SEA OFF:
No SEA mode is applied (see below).
To cancel the SEA mode
Turn MULTI JOG until "SEA OFF" appears in step 2 above.
The SEA indicator goes off from the display.
From the remote control:
1. Press SOUND.
10 keys are activated for sound adjustments.
2. Press SEA MODE repeatedly until the SEA mode you want
appears on the display.
Each time you press the button, the SEA mode changes
as follows:
SEA ROCK
SEA MUSICAL
SEA OFF
To cancel the SEA mode
Press SEA MODE until "SEA OFF" appears in step 2 above.
The SEA indicator goes off from the display.
SEA MOVIE
SEA COUNTRY
SEA JAZZ
SEA MOVIE
SEA COUNTRY
SEA USERMODE
SEA JAZZ
Notes:
• The SEA modes cannot be
used for recording.
SEA MODE
• When the SEA mode is turned
on, the SEA indicator lights up
on the display.
• When the SEA mode is used
with the DAP mode (see page
MULTI JOG
32), sounds may be distorted.
If this happens, turn off the
DAP mode or decrease the
effect level of the DAP mode.
SOUND
Note:
SEA MODE
When the SEA mode is turned
10
RETURN
on, the SEA indicator lights up
on the display.
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-1024vbkj

Table of Contents