Selecting Your Favorite Sea Mode - JVC RX-1024VBK Instructions Manual

For Dolby Surround Pro Logic:
"TEST TONE":
"CENTER LEVEL": Adjust the center speaker output level. **
"REAR L LEVEL": Adjust the left rear speaker output level. *
"REAR R LEVEL": Adjust the right rear speaker output level. *
"CENTER TONE": Select the center tone level. **
For Dolby Digital:
"TEST TONE":
"CENTER LEVEL": Adjust the center speaker output level. **
"REAR L LEVEL": Adjust the left rear speaker output level. *
"REAR R LEVEL": Adjust the right rear speaker output level. *
"CENTER TONE": Select the center tone level. **
For Theater Surround and Digital Theater Surround:
"TEST TONE":
"CENTER LEVEL": Adjust the center speaker output level. **
"REAR L LEVEL": Adjust the left rear speaker output level. *
"REAR R LEVEL": Adjust the right rear speaker output level. *
"CENTER TONE": Select the center tone level. **
"DSP EFFECT":
7. When you finish, press EXIT repeatedly until the menu disappears from the
TV.

Selecting Your Favorite SEA Mode

1. Press any button of ON SCREEN CONTROL % / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL % / fi to move
then press @ / #.
The SOUND CONTROL menu appears.
3. Press ON SCREEN CONTROL % / fi to move
The SEA menu appears.
4. Press ON SCREEN CONTROL % / fi to move
5. Press ON SCREEN CONTROL @ / # to select the SEA mode you want.
6. When you finish, press EXIT repeatedly until the menu disappears from the
TV.
Output a test tone.
Output a test tone.
Output a test tone.
Select the effect level. *
(Also see page 26)
to "SOUND CONTROL,"
to "SEA," then press @ / #.
to "SEA MODE."
Example:
SURROUND LEVEL menu
for Theater Surround
SURROUND LEVEL
TEST TONE : OFF
CENTER LEVEL: 0dB
REAR L LEVEL: 0dB
REAR R LEVEL: 0dB
CENTER TONE : FLAT
DSP EFFECT : 3
:OPERATE
Notes:
* Not displayed when "REAR
SPK" is set to "NONE" (see
page 19).
** Not displayed when
"CENTER SPK" is set to
"NONE" (see page 19).
MAIN MENU
MAIN MENU
SOURCE :VCR1
VISUAL :VCR1
MODE :OFF
SOUND CONTROL
* *
* *
TUNER CONTROL
* * * *
SETTING
* *
* *
:ENTER
VOLUME : 20
SOUND CONTROL menu
SOUND CONTROL
SURROUND LEVEL
* * * *
SEA
* * * *
BAL.:CNTR
LOUDNESS : OFF
INPUT ATT : NORMAL
SUBWFR LEVEL: 0dB
NEXT PAGE
:ENTER
SEA menu
SEA
SEA MODE :ROCK
SEA ADJUST
* * * *
100 1k 10kHz
:OPERATE
44