Preparing The Power Supply - Canon ZR 90 Instruction Manual

Preparing the Power Supply
CHARGE
indicator . . ,/:::
1_
li
O
p
L~
>
CARDICP.ARGE •
~
~~
Att,g,cbin,g,.,.,.tbe,.. . J3atte,(y:,."Pac:k'i""'·'"
1. Turn the POWER switch to OFF.
2. Move the viewfinder upward.
3. Attach the battery pack to the
camcorder.
• Remove the terminal
cover
of the battery
pack.
• Press lightly and slide it in the direction of
the arrow until it clicks.
The CHARGE indicator starts flashing. It
glows steadily when charging
IS
complete.
4. When charging is complete,
disconnect the power adapter from
the camcorder. Unplug the power
cord from the power outlet and
disconnect it from the adapter.
5. Remove the battery pack after use.
Press the BAD. RELEASE button to remove the battery.
Cbarg.ioiQ'iitbei.,.,8a,tte'[}(,i,.,eac:k""i";
1. Connect the power cord to the
adapter.
2. Plug the power cord into a power
outlet.
3. Connect the power adapter to the
camcorder's DC IN terminal.
13