To Start Drying - Conair 150 User Manual

To S t a r t D r y i n g
1
Make sure there is material in the hopper.
2
Turn on the main power to the dryer
the dryer's disconnect dial is in the ON position. This
powers up the control and the display lights will illu-
minate.
3
Set the drying temperature. Press the appropriate
Select Category button then the Adjust Setpoint (+) or
(-) buttons or enter the temperature on the numeric
keypad and press enter.
✐
NOTE: When changing a setpoint use the Select Category Key
directly below the value to be changed. Once pressed the value
will blink, then use the keypads or (+) (-) adjustment setpoints
to enter the new value. Then press enter for the new value to
be recognized.
When configured as a central dryer, the drying temperature
can not be set since there is no process heater in the system.
Select
Category
buttons
.
Make sure
Setpoint
adjustment
buttons
(continued)
O p e r a t i o n l 4 - 3 7