Specifications: Carousel Plus W Series Dryer - Conair 150 User Manual

D
C
B
2 - 6 l D e s c r i p t i o n
S p e c i f i c a t i o n s : C a r o u s e l P l u s W
S e r i e s D r y e r s
MODEL
Performance characteristics (with full hopper)
Air flow {SCFM} *
Air flow {ACFM @ 250°F}
Drying temperature
A
dewpoint
Dimensions inches {cm}
A - Height
B - Overall width
C - Control width
D - Depth
Control depth
Outlet/inlet tube size OD
Weight lbs {kg}
Standard Dryer Installed
Voltage - Total Amps
230 V/3 phase/60 Hz
400 V/3 phase/50 Hz
460 V/3 phase/60 Hz
575 V/3 phase/60 Hz
Total kilowatts kW {BTU/min}
Water requirements {for optional aftercooler or precooler}
Recommended temperature*
Water flow gal./min. {liters/min.}
Water connections NPT
SPECIFICATION NOTES:
* The term
SCFM stands for Standard Cubic Feet Per Minute, referenced to a pre-specified pressure, tempera-
ture and relative humidity. In most cases, SCFM is referenced to 14.7 PSIA 68° F and 36% relative humidity.
ACFM stands for Actual Cubic Feet Per Minute, and must be supplied with a temperature reference, due to the
change in air density with temperature. Because dryers operate at a relatively low pressure the effects on air den-
sity are negligible.
†
Dryers running at 50 HZ will have 17% less airflow, and a 17% reduction in material throughput.
Specifications may change without notice. Consult a Conair representative for the most current information.
W150 W200
75 100
101 134
*
All models 100 - 375°F {38 - 191°C} with options
All models
70.4 {178.8}
51.5 {130.8}
2.5 5
600 {272} 660 {300}
47.1 61.4
25.8 34
23.6 30.7
18.9 24.7
6.2 {353} 8 {455}
45° - 85°F
3 {11.4}
3/4 in. NPT
W300 W400
150 200
201 268
-40°F {-40°C}
29 {73.7}
24 {61.0}
8 {20.3}
5 5
710 {322} 760 {345}
67 N/A
38.5 63.6
33.5 55.3
26.8 44.3
11 {625} 14 {800}
TPDS018-0705-REV