Motion Picture - Panasonic Lumix DMC-CM1 Operating Instructions Manual

4. Camera

[Motion Picture]

∫
This menu lets you set the [Rec Quality], and other aspects for motion picture recording.
≥ [Photo Style], [Metering Mode], [i.Dynamic] and [i.Resolution] are common to both the [Rec] menu and [Motion
Picture] menu. Changing these settings in one of these menus is reflected in other menu.
– For details, refer to the explanation for the corresponding setting in the [Rec] menu.
[Rec Quality]
[Custom]
∫
Your favourite operation environment can be configured to suit the recording style.
[Cust.Set Mem.]
[Silent Mode]
[AF/AE Lock]
[AF Assist Lamp]
[Peaking]
[Peaking detect Level]
[Histogram]
[Guide Line]
[Auto Review]
[Touch Settings]
[Touch Shutter Setting]
[Volume button
setting]
This sets up the picture quality of motion pictures.
Registers the current camera function settings as custom set.
Disables operational sounds and output of light at once.
Sets the fixed content for focusing and exposure when the AF/AE lock is
on.
AF assist lamp will illuminate the subject when the shutter button is
pressed half-way making it easier for the unit to focus when recording in
low light conditions.
In-focus portions are highlighted when focus is being adjusted manually.
The detection level for in-focus portions is set.
This allows you to set either to display or not display the histogram.
This will set the pattern of guide lines displayed when taking a picture.
Set the length of time that the picture is displayed after taking the still
picture.
During recording, the focus and/or the brightness can be adjusted and
set at the position tapped on the display.
Sets whether to use the touch shutter or not when using an inward
facing camera.
Displayed during inward facing camera use only.
You can assign functions that are used frequently during recording to
[ ]/[ ].
93
P48
P62
P116
P117
P118
P119
P119
P120
P120
P120
P121
—
P121