Panasonic Lumix DMC-CM1 Operating Instructions Manual page 50

4. Camera
4K Pre-Burst
Burst files are recorded 1.5 seconds before and after the moment that the shutter
clicks, and your favourite frame can be selected and the still picture captured.
1
From the Recording screen > [
≥ Home screen > [
2
Taking a Still picture.
≥ Still pictures before and after the shutter clicks are displayed.
≥ Tap [ ] to capture the still picture from previously recorded
burst files.
3
Select frame to capture.
≥ Pinch out/pinch in or double tap to zoom in/zoom out of a
picture.
4
Tap [ ].
≥ Captured still pictures are stored in the "PRE-BURST" folder if
[Store in] is set to [Internal Storage].
When [Store in] is set to [microSD], the still pictures are stored
in the "PRE-BURST[SD]" folder on the microSD card.
≥ The following settings can also be configured with [4K Pre-Burst].
Menu
[RECORDING
SETTINGS]
[SETUP]
≥ Burst files recorded with the [4K Pre-Burst] app cannot be played back with other apps.
They are also excluded from automatic backup.
≥ The settings when recording a burst file are updated to the position information and save location settings of the
captured picture.
≥ Striping or flickering may appear under lighting such as fluorescent lighting and LED lighting fixtures, however
this is characteristic of MOS sensors which serve as the unit's pickup sensor, and is not a malfunction.
Lowering the shutter speed may reduce the effect of the horizontal stripes.
] > [
] also starts the app.
(P46)
[Rec Quality]
[Shutter Speed]
[Burst picture file]
[Location Logging]/[Store in]/[Auto Backup]/[Auto OFF]/[Beep]/[Shutter]/[Note]/
[Reset]
].
Item
[3840k2160 15fps]/[1920k1080 30fps]
[Auto]
[Manual]:
Operate the control ring to set the shutter
speed. (P84)
[Save]/[Do not save]
50