Taking Pictures By Using The Flash - Panasonic Lumix DMC-CM1 Operating Instructions Manual

Advanced features
Hide thumbs Also See for Lumix DMC-CM1:
Table of Contents

Advertisement

4. Camera

Taking pictures by using the flash

Applicable modes:
With the built-in flash you can take pictures in dark places or adjust the entire
contrast of a picture by illuminating a subject with a bright background.
From the Recording screen > [
[‡]
([Auto])
[‰]
([Forced Flash On])
[
]
([Always ON])
[Œ]
([Forced Flash Off])
≥ Correcting red-eye
Flash
Do not cover it with your fingers or other objects.
The flash is automatically activated when the recording conditions
make it necessary.
≥ The flash is [
[Auto Bracket] or recording motion pictures. It does not turn
off until recording is complete.
The flash is activated every time regardless of the recording
conditions.
≥ The flash is temporarily [‡] while [Burst], [Auto Bracket] or
recording motion pictures.
Permanently on.
≥ The available recording range is smaller than when recording
with [‡] and [‰].
The flash is not activated in any recording conditions.
≥ Use this when you take pictures in places where the use of
flash is not permitted.
(P113)
] >
[Rec] > [Flash].
] to suit recording conditions while [Burst],
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents