Panasonic Lumix DMC-CM1 Operating Instructions Manual page 186

20. Others
Recording
∫
The picture cannot be recorded.
≥ Is there any memory remaining on the built-in memory or the microSD card?
> Delete the pictures which are not necessary to increase available space in the memory.
≥ You may not be able to record for a short while after turning this unit on when using a large capacity microSD card.
The recorded picture is whitish.
≥ Picture might look whitish when lens gets dirty with fingerprints or similar.
> If the lens is dirty, lightly wipe the surface with a soft, dry cloth.
The recorded picture is too bright or dark.
≥ Check that the exposure is correctly compensated.
≥ Is the AE Lock (P117,
Multiple pictures are taken at one time.
≥ Cancel the following settings:
– [Burst]/[Auto Bracket]
The subject is not focused properly.
≥ The subject is beyond the focus range of the unit.
≥ There is camera shake (jitter) or the subject is moving slightly.
≥ Is the AF Lock (P117,
The recorded picture is blurred.
≥ The shutter speed becomes slower when pictures are taken in dark places so hold the unit firmly with both hands to
take the pictures. (P40)
≥ When taking pictures at a slow shutter speed, use the Self-timer.
The recorded picture looks rough.
Noise appears on the picture.
≥ Try the following:
> Take pictures in bright places.
> Decrease the ISO sensitivity.
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the items other than
[Noise Reduction].
> Is the [Picture Size]
Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture.
≥ This is characteristic of MOS sensors which serve as the unit's pickup sensors.
This is not a malfunction.
> Lowering the shutter speed may reduce the effect of the horizontal stripes.
121) applied incorrectly?
(P96)
121) applied incorrectly?
(P87)
(P102)
or the [Quality]
(P104)
(P86)
(P100)
set low?
(P105)
186
(P126)