Setting The Light Sensitivity - Panasonic Lumix DMC-CM1 Operating Instructions Manual

4. Camera

Setting the Light Sensitivity

Applicable modes:
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures
coming out dark.
1
] > [
[
2
Operate the control ring to configure settings.
[AUTO]
[ ]
(Intelligent)
[L.100] ¢2 /[125]/[200]/[400]/[800]/
[1600]/[3200]/[6400]/[12800]/
[H.25600] ¢2
¢1 When the [ISO Limit Set]
the value set in [ISO Limit Set].
¢2 Only available when [Extended ISO] is set.
3
Tap [ ].
Characteristics of the ISO sensitivity
Recording location (recommended)
Shutter speed
Noise
Jitter of the subject
]. (P84)
(P113) of [Rec] menu is set to anything except [OFF], it is set automatically within
The ISO sensitivity is automatically adjusted according to the
brightness.
≥ Maximum [3200] ¢1
The unit detects movement of the subject and then automatically
sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimise
the jitter of the subject.
¢1
≥ Maximum [3200]
≥ The shutter speed is not fixed when the shutter button is pressed
halfway. It is continuously changing to match the movement of the
subject until the shutter button is pressed fully.
The ISO sensitivity is fixed to various settings.
≥ When the [ISO Increments]
[1/3 EV], items of ISO sensitivity that can be set will increase.
125
When it is light (outdoors)
Slow
Less
Increased
87
AUTO
AU AU AU AU o o o
T T T
(P114) in [Rec] menu is set to
12800
When it is dark
Fast
Increased
Less