Shot Mark Operation Menu - Sony MSW-A2000 Operation Manual

6-2 Shot Mark Operation Menu

This section describes the settings in the shot mark
operation menu.
Displaying the shot mark operation menu
With the function menu HOME page showing in the
menu display, hold down the MARK button, and press
the F5 (MENU) button.
Z
MARK button
All the VTRs illustrated in Chapter 6 are the
MSW-M2000/M2000P/A2000/A2000P/2000.
The following menu appears on the monitor.
SHOT MARKER
GO1:SEARCH TYPE -
GO2:LISTING TYPE
GO3:RS.MARK MODE
GO4:MARK IN REC
6-2
Chapter 6 Shot Mark Function
F5 (MENU) button
all
shot1
Details of the shot mark operation menu
The shot mark operation menu comprises four items,
G01 to G04. The detailed contents appear in the
following table.
Item Item name Settings
number
G01 Select which shot mark type the
SEARCH
index function searches for, from
TYPE
the following possibilities:
all
rec start mark
shot mark 1
shot mark 2
post mark
G02 LISTING For each type of shot mark,
TYPE select whether to read into the
list (ON) or not read (OFF):
rec start mark
shot mark 1
shot mark 2
post mark
G03 RS.MARK For each type of recording,
MODE select whether to write recording
start marks (ON) or not write
them (OFF):
crash rec: crash recording
assemble: assemble editing
insert: insert editing
G04 MARK IN REC Select the type of shot mark to
write during recording and
assemble editing.
shot mark 1
shot mark 2
post mark
Changing the menu settings
The basic procedure for accessing menu items and
changing settings is the same as for the setup menus.
Note, however, the operations in "To change the
settings of menu items with sub-items" (page 12-3) for
items G02 and G03.
Similarly to the setup menu, the shot mark operation menu is
configured so that its current settings as well as menu banks
are saved separately for 525-line and 625-line modes. For
the menu bank operation of the shot mark operation menu,
the same procedure is used as that of the setup menu.
For details of the setup menu configuration and operations,
see Section 12-1 "Setup Menu Configuration" (page 12-1)
and Section 12-2 "Setup Menu Operations"(page 12-2),
respectively.