Sony MSW-A2000 Operation Manual page 145

12-4 Items in the Extended Setup Menu
Menu items in the range 800 to 899, relating to audio control (Continued)
Item number Item name
827 AES OUT SEL
Sub-item
1 CH1/CH2
2 CH3/CH4
828 SDI OUT SEL
Sub-item
1 CH1/CH2
2 CH3/CH4
829 SDTI OUT SEL
Sub-item
1 CH1/CH2
2 CH3/CH4
12-30
Chapter 12 Setup Menus
Settings
Select the audio signals to assign to AES/EBU audio output channels.
Note
Check to be sure that the selected tracks are being output from the AES/EBU
OUTPUT connectors.
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
Select the audio signals to assign to SDI audio output channels.
The HD-SDI OUTPUT connector of the UP-CONTROL option also follows this
menu item.
Note
Check to be sure that the selected tracks are being output from the SDI OUTPUT
connectors.
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
Select the audio signals to assign to SDTI audio output channels.
Note
Check to be sure that the selected tracks are being output from the SDTI
OUTPUT connectors.
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.