Reading In Shot Data - Sony MSW-A2000 Operation Manual

Digital videocassette player
Hide thumbs Also See for MSW-A2000:
Table of Contents

Advertisement

Cueing up to shot marks adjacent to the
current tape position (index function)
1
In item G01 of the shot mark operation menu
(page 6-2), select one of recording start mark, shot
mark 1, shot mark 2, and post mark, or select all.
2
Holding down the MARK button, press the F FWD
button or REW button.
While the tape is moving the F FWD button or
REW button flashes.
When the shot mark is detected, its type is
displayed in time data display area 2 on the
lower control panel and in the character
information display on the monitor screen.
For details of character information display on the
monitor screen, see F4 (CHARA) in function menu page
4 (page 11-7) and setup menu item 005 (page 12-5).
Note
You cannot use the above procedure to cue up to a
virtual shot mark.

6-3-5 Reading In Shot Data

When there is shot data (time, device, and other
information about the shooting) written on the tape,
you can read it in and display it on the monitor.
Displaying the shot data
Holding down the ENTRY button, press the PLAY
button.
Z
ENTRY button
PLAY button
The tape is played back, and the shot data displayed.
To delete the shot data
Once again hold down the ENTRY button, and press
the PLAY button.
Example of shot data display
The shot data display appears as shown below.
MODEL NAME
SERIAL NUMBER
DATE
TIME
CASSETTE NUMBER
SHOT NUMBER
ID1
ID2
Camera IDs
ID3
ID4
Recording
TCR 23:59:59:29
time code
The details in the shot data depend on the shooting
conditions. If because of the devices used there is no
shot data on a part of the tape, it appears as blank.
Displaying the shot data on the shot mark
list
Turn the MULTI CONTROL knob to position the
cursor on a separator in the shot mark list.
If there is shot data recorded when the immediately
following shot mark was written, it appears in the
display as shown below.
Model name (4 characters)
Serial number (6 digits)
SHOT MARK
(---/180)
Shot data
NO.
TIME CODE
*012345-DNW_-0123-4567-
First shot
011
S1
10:04:05:11
mark in the
012
R
10:05:35:24
group
013
V
10:07:05:02
----------------------------
014
R
10:08:35:04
015
S2
10:09:05:11
016
R
10:10:35:24
017
R
10:10:36:00
You can sort the shot marks in the list, based on the shot
data. For details, see the next section.
Chapter 6 Shot Mark Function
DNW 0090
010001
1998.05.11
12.55.10
0095
0052
AAAAAAAAAAAA
BBBBBBBBBBBB
CCCCCCCCCCCC
DDDDDDDDDDDD
Model number (4 digits)
Cassette number (4 digits)
6-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents