Sony MSW-A2000 Operation Manual page 135

12-4 Items in the Extended Setup Menu
Item number Item name
651
UMID OUTPUT
652 UMID SD VANC LINE
654 UMID GENERATE
METHOD
655 UMID RECORDING
656 MATERIAL NO.
12-20
Chapter 12 Setup Menus
Menu items in the range 651 to 699, relating to the UMID
Settings
Select UMID output and the UMID type.
off : Do not output UMID.
BASIC: Output Basic UMID.
EXTND: Output Extended UMID.
Notes
• Even if EXTND is selected, Basic UMID is output if Basic UMID is recorded on
the tape being played back.
• When menu item 901 VIDEO OUTPUT DATA is set to "8 bit", nothing of UMID is
output regardless of the setting of this menu item.
Specify the SDI signal VANC line into which the UMID should be inserted.
12H, 13H, 15H, 16H, 17H , 18H, 19H (MSW-M2000/A2000/M2000E)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H , 18H (MSW-M2000P/A2000P/
M2000EP)
Notes
• When SDI signals containing a UMID are output in E-E mode, the output VANC
line follows the input VANC line, regardless of the setting of this item.
• The output VANC line during playback follows the setting for recording.
Select the Instance No. generation method when the UMID is inherited.
16bit : Copy No. + 16-bit random number
24bit: 24-bit random number
Note
When menu item 656 is set to NEW (an Instance Number indicating that this is
the original is generated), the same value (all zeros) is generated regardless of
which of the above methods is selected.
Select the UMID type to be recorded to tape.
off : Do not record UMID.
BASIC: Record Basic UMID.
EXTND: Record Extended UMID.
Select whether to inherit the UMID in the input signal when recording a UMID.
INPUT : Inherit the UMID in the input signal, if it is present.
• Even when INPUT is selected, a new UMID is generated if the input signal does
not contain UMID data (the same behavior as when NEW is selected).
• When recording with inherited data, the Instance Number is newly generated
according to menu item 654, changing to a value that indicates that "this is a
copy".
• When the UMID in the input signal is a Basic UMID, a Basic UMID is recorded,
even if menu item 655 is set to EXTND.
• When the UMID in the input signal is an Extended UMID, the recorded UMID
follows the setting of menu item 655.
NEW: Generate a new UMID, regardless of whether or not the input signal
contains a UMID.
• The Basic section does not change during recording.
• An Instance Number indicating that "this is the original" is generated.
• The Source Pack Date/Time (when) changes with each frame.
• The Source Pack Spatial Co-ordinates (where) are not recorded.
• The Source Pack Stored Ownership (who) can be set. (See the section "To set
Stored Ownership" (page 8-2) ).
(Continued)