Table of Contents
Advertisement
4. BASIC OPERATION
10
The flow of basic operation is described below.
For more details of each operation, refer to the corresponding pages.
1
Recall one of the P01, P02, and P03 preset programs corresponding to the
algorithm used.
For the algorithm, refer to page 13.
For the recall operation, refer to page 32.
2
Execute the edit operation (change the parameter) and change the effect.
For the edit operation, refer to page 25.
3
Store the created program.
For the store operation, refer to page 33.
Reference
Each preset program is used as a program of the algorithm below.
P01 (A) Start program of the dynamics algorithm
P02 (B) Start program of the DAL-1000 algorithm
P03 (C) Start program of the tap delay algorithm
The three programs are the source of program creation based on each algorithm. These programs are
based on a parameter that gives no effect when they are recalled.
The programs that were created in advance have been installed in P04 or later preset programs. These
preset programs can also be recalled or modified in parameter before use.
Hide quick links:
Advertisement
Table of Contents
