Sony MSW-A2000 Operation Manual page 131

12-4 Items in the Extended Setup Menu
Menu items in the range 300 to 399, relating to editing operations (Continued)
Item number Item name
333 DIGITAL AUDIO EDIT
PRESET REPLACE
334
EE REFERENCE
CONTROL
EDIT PRESET INHIBIT IN
336
KEY PANEL CONTROL
Item number Item name
401 FUNCTION MODE
AFTER CUEUP
402 TIME REFERENCE FOR
PREROLL
403 AUTOMATIC PREROLL
REFERENCE ENTRY
405 CUEUP BY CTL
a) When controlled from an editor (BVE-2000/9100 etc.),
selecting "REEL" allows high-speed cuing up.
12-16
Chapter 12 Setup Menus
Settings
Select how to apply digital audio edit preset from an external controller.
NODEF : Apply edit preset for channels 1 to 8 from external controller to tracks 1
to 8, correspondingly.
PARA: Apply edit preset for channels 1 to 4 from external controller to tracks 1
and 5, tracks 2 and 6, tracks 3 and 7, and tracks 4 and 8, respectively. Ignore
edit preset for channels 5 to 8.
REVRS: Apply edit preset for channels 1 to 4 and channels 5 to 8 from external
controller to tracks 5 to 8 and tracks 1 to 4, respectively.
STERE: Apply edit preset for channels 1 to 4 from external controller to tracks 1
and 2, tracks 3 and 4, tracks 5 and 6, and tracks 7 and 8, respectively. Ignore
edit preset for channels 5 to 8.
Specify how to select the reference video signal in E-E mode.
normal : Select according to the flowchart in Section 3-2-1 "External Sync Signal
for the Internal Reference Video Signal Generator" (page 3-5) .
input: In E-E mode select the input video signal. When not in E-E mode, select
according to the flowchart in Section 3-2-1 "External Sync Signal for the
Internal Reference Video Signal Generator" (page 3-5) .
Specify which buttons are disabled in the editing mode setting section on the
lower control panel.
off : Disable all buttons.
TC: Disable the TC button.
Menu items in the range 400 to 499, relating to preroll
Settings
Select the state that the unit goes into after a cuing-up operation.
STOP : Stop (the "stop mode")
STILL: Still playback (in search mode)
Note
When controlling this unit from an editor with the standard constants set, select
"STOP".
When prerolling a tape with time code discontinuities, select whether or not to use
CTL pulses to count time code from before a discontinuity.
CTL : Use CTL pulses to count time code.
TC: Do not use CTL pulses to count time code.
Select whether or not the edit IN point is automatically set by pressing the
PREROLL button, when the IN point is not set before starting preroll.
DIS : IN point is not set automatically.
ENA: IN point is set automatically.
Select the tape transport mode when cuing. This setting is valid only when the
function menu item CTL/TC is set to CTL.
CAP. : During cuing up, the tape transport is in the "pinch ON" state (maximum
tape speed 10 times normal).
REEL : During cuing up, the tape transport is in the "pinch OFF" state. As the
tape approaches the cue up point and the tape speed drops, the tape transport
switches to the "pinch ON" state.
To give priority to editing accuracy, select "CAP.".
a)