Sony MSW-A2000 Operation Manual page 122

Item number Item name
023 LOCAL KEY MAP
Sub-item
1 STOP
2 PLAY
3 REC/EDIT
4 STANDBY
5 EJECT
6 JOG
7 SHUTTLE
8 VAR
9 FF/REW
10 PREROLL
11 AUTO/PRE/REVIEW Select whether the AUTO EDIT, PREVIEW, REVIEW buttons function.
12 F-KEY
13 AUDIO/MONITOR Select whether the audio signal buttons function.
14 EDIT PRESET
15 OTHERS
029 STORED OWNERSHIP
B01 RECALL BANK 1
B02 RECALL BANK 2
B03 RECALL BANK 3
B11 SAVE BANK 1
B12 SAVE BANK 2
B13 SAVE BANK 3
B20 RESET SETUP
Settings
When MAP is selected in menu item 006, the buttons that can be operated on the
control panel of this unit when it is being controlled by remote control from
another device can be selected from the following sub-items.
The settings of each sub-item are as follows.
DIS : Do not function.
ENA: Function.
Select whether the STOP button functions.
Select whether the PLAY button functions.
Select whether the REC and EDIT buttons function.
Select whether the STANDBY button functions.
Select whether the EJECT button functions.
Select whether the JOG button functions.
Select whether the SHUTTLE button functions.
Select whether the VAR button functions.
Select whether the F FWD and REW buttons function.
Select whether the PREROLL button functions.
Select whether the F1 to F6 buttons function.
Select whether the EDIT PRESET button functions.
Select whether the ENTRY, IN, OUT, AUDIO IN, AUDIO OUT, TRIM+, TRIM-,
GS-MARK, GS-LIST, DELETE, and DMC EDIT buttons function.
Select whether or not to set the Stored Ownership UMID item.
off : Do not set.
on: Set.
To set Stored Ownership, display this item in the menu display section, and press
the F5 (SET) button to move to the Stored Ownership setting screen.
For details, see the section "To set Stored Ownership" (page 8-2).
Set to "on" to recall menu settings from menu bank 1.
Set to "on" to recall menu settings from menu bank 2.
Set to "on" to recall menu settings from menu bank 3.
Set to "on" to save current active menu settings to menu bank 1.
Set to "on" to save current active menu settings to menu bank 2.
Set to "on" to save current active menu settings to menu bank 3.
Set this item to "on" to return the current menu settings to the factory defaults.
Set it to bank-4 to use the contents of menu bank 4 as the current menu settings.
For details about menu bank 4, refer to the Maintenance Manual.
12-7
Chapter 12 Setup Menus