Mounting And Securing The Juice; Final Inspection - Edge Products Juice Installation Instructions Manual

I N S T A L L A T I O N
1. Attach one side of each velcro
strip to the back side of the Mod-
ule and to the top side of a fl at
surface under the hood. (Figure
2) NOTE: The best place is the
top of the fuse box on the driver
side. This will secure the Juice
module and help keep it away
from any moving/hot parts under
the hood.
1. Recheck all connections for a properly secure installation. Using the supplied
wire ties, secure the wiring harness and cable to prevent possible heat damage
from hot engine surfaces.
2. Reconnect the battery cables.
3. Start the engine. The engine should start and idle like a stock truck. If the
engine does not start or run properly, turn off the engine. Remove the keys from
the ignition, and check the Juice module connections. Make sure all connectors
are fastened tightly. If you continue to have problems, contact your dealer or
Edge Products, LLC.
42

MOUNTING AND SECURING THE JUICE

F I N A L F I N A L I N S P E C T I O N I N S P E C T I O N
D o d g e
I n s t a l l a t i o n
Figure 2 - Juice Module Mounting
J u i c e
I n s t r u c t i o n s