Connecting To Turbo Timer - Edge Products Juice Installation Instructions Manual

D o d g e
I n s t a l l a t i o n
1. Locate and remove Fuse 16 (10 Amp) from inside the engine compartment
fuse panel.
4. Insert the Leaded Fuse Link (see Figure 2). The leg with the wire soldered to
it needs to plug into the "HOT" side of the fuse location. Orient the fuse exactly
as shown in Figure 3 above.
5. From the main harness, connect the Red Turbo Timer Connector to the in-
stalled Fuse Link (Figure 3)
NOTE: YOUR JUICE MODULE INSTALLATION IS NOT COMPLETE. RE-
FER TO THE "EGT PROBE INSTALLATION" SECTION TO CONTINUE.
J u i c e
I n s t r u c t i o n s
Figure 3 - Fuse Tap Locations

CONNECTING TO TURBO TIMER

I N S T A L L A T I O N
25