Redial; Dial A Number Via Contact - Grandstream Networks GXV3275 User Manual

Note:

By default, the "No Key Entry Timeout" is 4 seconds, meaning if no key is pressed after starting
entering number, the call will be automatically sent out after the timeout. The timeout interval can be
configured under web GUI->Account->Call Settings.

GXV3275 allows users to press # key as SEND key. This behavior can be disabled via option "Use #
as Dial Key" under web GUI->Account->Call Settings.

When the user enters the digit on the dial screen, if there is digit matching call history, or contacts
name/number, the drop-down list will show the numbers. For example, if "John" is saved in the
contacts, entering 5 (JKL) 6 (MNO) 4 (GHI) 6 (MNO) will show call log with 5646 as the first four digits,
as well as John's number. Users could then directly select one of them from the list, instead of
entering all the digits.

REDIAL

Users can dial out the last dialed number if there is dialed call log, using the same SIP account making
the call last time.
1. Enter the dial screen.
2. A list of dialed call will be displayed on the left side of the dial pad. Tap on the number you would like
to call to redial.

DIAL A NUMBER VIA CONTACT

Follow the steps below to dial a number via Contact.
1. Access Contacts by tapping on
phone's menu.
2. Navigate in the contacts entries by sliding up/down on the screen.
3. Tap on the dial icon for the contact
Firmware Version 1.0.3.6
icon on the bottom of the idle screen, or selecting
.
GXV3275 User Guide
from
Page 54 of 167