Table Of Contents; Pre-Installed Bolt; Lower Handlebar - Horizon Fitness Syros Owner's Manual

ASSEMBLY Step 3
SYROS
PRE-INSTALLED BOLT
SYROS PRO
PRE-INSTALLED ARC WASHER
PRE-INSTALLED FLAT WASHER Φ36
PRE-INSTALLED FLAT WASHER Φ38
AXLE

LOWER HANDLEBAR

CONSOLE MAST
8
NOTE: There is no hardware for this step.
A Slide AXLE through CONSOLE MAST carefully.
B Attach the LOWER HANDLEBAR to CONSOLE
MAST using 1 PRE-INSTALLED BOLT, 1 PRE-
INSTALLED ARC WASHER, 1 PRE-INSTALLED
FLAT WASHER Φ36 & 1 PRE-INSTALLED
WASHER Φ38.
C Repeat steps B on the opposite side.
ASSEMBLY Step 4
PRE-INSTALLED SCREW
PRE-INSTALLED BOLT
34
33
30
PEDAL ARM COVER

PRE-INSTALLED BOLT

LOWER HANDLEBAR
CRANK
PEDAL ARM
27
41
39 102
HarDWare partS:
BOLT (27) BOLT (30) FLAT WASHER (33)
M8 x 20 M10 x 78 Φ10 x Φ19 x 2T
Qty: 2 Qty: 2 Qty: 2
NUT (34)
FLAT WASHER (39) END CAP (41)
M10 Φ8 x Φ21 x 2T
Qty: 2
Qty: 2 Qty: 2
ARC WASHER (102)
Φ8
Qty: 2
A Slide PEDAL ARM to CRANK using 1 FLAT
WASHER (39), 1 ARC WASHER (102), 1 BOLT(27)
& 1 END CAP (41).
B Align opposite end of PEDAL ARM on the bottom of
LOWER HANDLEBAR, secure the joint with 1 BOLT
(30), 1 FLAT WASHER (33) and 1 NUT(34).
C Attach the PEDAL ARM COVER from both side of
PEDAL ARM using 2 PRE-INSTALLED BOLTS and
2 PRE-INSTALLED SCREWS.
d Repeat steps A-C on the opposite side.
SYROS
SYROS PRO
9