Restoring Default Settings; Viewing System Information - Interlogix TruVision NVR 50 User Manual

Restoring default settings

To restore the default factory settings of the NVR:
1. Click the System Settings
Configuration.
2. Click the Default
Note: Network information such as IP address, subnet mask, gateway, MTU,
NIC working mode, server port and default route are not restored to factory
default settings.

Viewing system information

To view system information:
1. Click the System Settings
Information.
2. To view device information, click the
3. To view camera information, click the
TruVision NVR 50 User Manual
icon in the menu toolbar and select
tab. Click OK to confirm you want to restore default settings.
icon in the menu toolbar and select
14BChapter 15: NVR management
Device Info tab.
camera tab.
System
117