Table of Contents
Advertisement
I
S
S
NSTALL THE
ERVER
TEP
Step 6: Set Library Updates
Activate the Web Filter
54
6: S
L
U
ET
IBRARY
PDATES
After verifying that the Web Filter is correctly functioning on your network, you need
to activate Web Filter library updates. Library updates are critical for filtering as
new sites are added to the M86 Security library each day. To activate updates, visit
the M86 Security Web site and enter the activation code that was issued to you by
e-mail (also included on the product invoice).
NOTE: Port 443 (HTTPS) must be open for outgoing requests so that the WFR can
receive library updates.
Be sure you have a valid host name chosen before activating your account.
A. Open an Internet browser window and go to http://www.m86security.com/
support/activate-appliance.asp.
B. After reading through the online End User License Agreement, click Accept to
go to Step 2 of the activation process.
C. Enter your activation code.
D. Click Submit to go to the Activation and Registration page.
E. Verify that your serial number and activation code are the same as shown on
this registration page.
F. Fill out the information on this page, including the host name for the public DNS
server. The entry of the unique host name you've chosen is mandatory in
order to receive library updates.
G. After all information is entered, click Activate to activate your service. You
should receive confirmation that the Web Filter at your host name has been acti-
vated.
You may wish to print the confirmation page for future reference in dealing with
technical issues.
M86 S
I
G
ECURITY
NSTALLATION
UIDE
Advertisement
Table of Contents
