M86 Security 350 Installation Manual page 60

I S S
NSTALL THE ERVER TEP
52
4: G SSL C
ENERATE ERTIFICATE
C. Enter a line in the hosts file with the WFR's IP address and its host name—the
latter entered during the Configure host name screen of the Quick Start Setup
Procedures (Step 1A), or the Host Name screen in LCD Panel Setup Proce-
dures (Step 1B)—and then save and close the file.
D. In the address field of your newly opened IE browser, from now on you will need
to use the WFR's host name instead of its IP address—that is https://host-
name:8443 would be used instead of https://x.x.x.x:8443. Click Go to open
the WFR Welcome window:
Proceed to Step 5: Test Filtering or the Mobile Client Connection.
M86 S I G
ECURITY NSTALLATION UIDE