Step 5: Test Filtering or the Mobile Client Connection
Test Filtering on the Web Filter
If the Web Filter has been set up in the Invisible, Router, or Firewall mode, you
should test filtering the Web Filter.
A. Open a browser window on a network workstation, and then go to the following
empty sites to test pornography filtering:
• http://test.8e6.com
• http://testsite.marshal.com
• http://test.marshal8e6.com.tw
B. You should receive a block page for each URL tested. If you do not, contact an
M86 Security solutions engineer or technical support representative.
Test the Mobile Client Connection
If the Web Filter has been set up to use the Mobile mode, you should verify that the
Mobile Client can reach the Web Filter.
A. Use a workstation on which the Mobile Client is installed that is not on a filtered
portion of the LAN. Open a browser window on a network workstation, and then
go to a few test sites you set up to be blocked by the Mobile Client.
B. The connections should be blocked, and the block pages served by the Web
Filter should display in the browser's Address field. If you do not receive a block
page for each tested URL, contact an M86 Security solutions engineer or tech-
nical support representative.
M86 S
I
G
ECURITY
NSTALLATION
UIDE
I
S
S
5: T
NSTALL THE
ERVER
TEP
F
M
EST
ILTERING OR THE
OBILE
C
C
LIENT
ONNECTION
53