I
S
S
NSTALL THE
ERVER
TEP
System Status screen
Log Off, Disconnect the Peripherals
26
1A: Q
S
S
P
UICK
TART
ETUP
ROCEDURES
The System Status screen contains the following information:
• Operation Mode for the Web FIlter specified in screen 3 (Change filtering
mode)
• Capturing Interface specified in screen 4 or 5 (Configure network interface
LAN1 or LAN2)
• Management and Blocking Interface specified in screen 4 or 5 (Configure
network interface LAN1 or LAN2)
• lan1 IP address and netmask specified in screen 4, and current status ("Active"
or "Inactive")
• lan2 IP address and netmask specified in screen 5, and current status ("Active"
or "Inactive")
• Default gateway IP address specified in screen 6 (Configure default gateway)
• host name for the Web Filter specified in screen 8 (Configure host name)
• DNS server IP address(es) specified in screen 7 (Configure DNS servers)
• Regional timezone setting specified in screen 9 (Time Zone regional setting)
• Current status of the Web Filter
• Current Web Filter software Version installed
• Library update status
• Current status of the Enterprise Reporter and Threat Analysis Reporter applica-
tions
NOTE: Modifications can be made at any time by returning to the specific screen of the
Quick Start procedures.
A. After completing the Quick Start setup procedures, return to the Quick Start
menu screen and press 9 to log out.
B. Disconnect the peripherals from the WFR.
Proceed to Step 2: Physically Connect the Unit to the Network.
M86 S
I
G
ECURITY
NSTALLATION
UIDE