Step C: Create A New Report Using Yesterday's Date Scope; Step D: Create A Double-Break Report With Two Sets Of Criteria - M86 Security 350 Installation Manual

Step C: Create a New Report using yesterday's date scope

1. At the top of the Summary Drill Down Report view, click the New Report button
to open the Drill Down Report pop-up window:
2. By default, "Today" displays in the Date Scope field. Choose "Yesterday" from
this menu.
3. Click Apply to accept your selection and to close the pop-up window. The
regenerated report now displays yesterday's data in the Summary Drill Down
Report view.
In the WFR User Guide index, see:
• How to: create a New Report from the current report view

Step D: Create a double-break report with two sets of criteria

1. To continue this exercise, select the record for the category you wish to further
investigate.
NOTE: If necessary, scroll down to view the entire list of categories in the report view.
2. Now, to find out who is visiting sites in this category, you will need to identify the
user(s).
Since there are two sets of criteria you need for this exercise, you must drill
down into the selected category and also specify that you wish to view user IP
addresses. By specifying two sets of criteria, you create a double-break report
view.
Note the columns of filter buttons to the right of the Categories column. Click the
Category/IPs button corresponding to the targeted category:
M86 S I G
ECURITY NSTALLATION UIDE
B F R
EST ILTERING AND EPORTING
P E R
RACTICES NTERPRISE EPORTER
U S
SAGE CENARIOS
95