I
S
S
NSTALL THE
ERVER
TEP
Step 1A: Quick Start Setup Procedures
Link the Workstation to the WFR
Monitor and Keyboard Setup
Serial Console Setup
16
1A: Q
S
S
P
UICK
TART
ETUP
ROCEDURES
A. Connect the PC monitor and keyboard cables to the rear of the WFR chassis.
B. Turn on the PC monitor.
C. Proceed to the next set of instructions: Power on the WFR.
A. Using the serial port cable (and USB DB9 serial adapter, if necessary), connect
the laptop to the rear of the chassis (see "serial port" in Fig. 1 for a 300 series
unit or Fig. 2 for a 500 series unit).
Fig. 1 - Rear of 300 series chassis with serial port identified
Fig. 2 - Portion of 500 series chassis rear with serial port identified
B. Power on the laptop.
C. Proceed to the next set of instructions: Power on the WFR.
M86 S
I
G
ECURITY
NSTALLATION
UIDE