Removal Of The Pcb / Electrical Box - Daikin SiEN04-306D Service Manual

Outdoor Unit
2.3

Removal of the PCB / Electrical Box

Procedure
Step
Remove the top panel
and the front panel.
1. Remove the right side
panel.
1 Disconnect the three
connection wirings and
the two earth wires.
2 Loosen the three
screws of the right side
panel.
3 Loosen the fixing screw
of the electrical box.
174
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Right side
panel
Terminal strip board
(R2698)
(R2699)
SiEN04-306D
Points
Terminal strip number
black (1) ----- power supply
white (2) ----- power supply
red (3) ----- transmission
yellow / green ( ) ----- earth
Removal Procedure