Caution for Diagnosis
1. Caution for Diagnosis
The Operation lamp flashes when any of the following errors is detected.
1. When a protection device of the indoor or outdoor unit is activated or when the thermistor
2. When a signal transmission error occurs between the indoor and outdoor units.
In either case, conduct the diagnostic procedure described in the following pages.
Location of
Operation Lamp
Troubleshooting
with the LED
Outdoor Unit
Indication
The outdoor unit has one green LED (LED A) on the PCB. The flashing green LED indicates
normal condition of microcomputer operation.
102
malfunctions, disabling equipment operation.
Operation lamp (green)
TIMER lamp (yellow)
HOME LEAVE lamp (red)
Air outlet
Indicator lamps
SiEN04-306D
ON/OFF switch
(R2837)
(R2838)
Service Diagnosis