Indicators On The Control Panel - Fujitsu PRIMERGY TX1320 M1 Operating Manual

Starting up and operation
6.3.1.3

Indicators on the control panel

Symbol Indicator
Power-on Power-on
indicator indicator
HDD / SSD
activity
indicator
66
Status Description
green on Server is switched on and running.
Server is switched off, but mains
voltage is present (standby mode).
I
orange on
iRMC booting
I
yellow /
orange
flashing
Power on delay
I
yellow on
green
Data access in progress
flashing
Operating Manual
After connecting the server
to the mains, it will take
about 60 seconds until the
server will switch into
standby mode.
After connecting the server
to the mains (power cord
plugged in / after mains
failure) the iRMC will boot.
The system cannot be
switched on, until the iRMC
boot sequence is complete.
During this time, the power-
on indicator will flash
yellow / orange.
After shutting down, the
server cannot be switched
on again right away. If the
On / Off button is pressed
right after shutting down the
server, the power-on
indicator will light up yellow
until the delay period ends
and the server will boot.
TX1320 M1