Starting up and operation
Figure 10: Opening the drive cover
Ê Turn the key clockwise (1) and remove the key.
Ê Open the drive cover carefully in the direction of the arrow (2) until the
ratches of the cover are released, and pull it downward to remove it (3).
V
CAUTION!
Do not pull too hard to avoid damage to the locking mechanism.
Ê Attach the drive cover to the recesses on the HDD cover (4).
Ê Push down the HDD cover in the direction of the arrow (5).
I
Please note the following when operating with tape drives:
If the system is programmed to eject the media automatically, the
accessible drives must not be obstructed.
The drive cover is replaced and the server locked in the reverse order.
60
Operating Manual
TX1320 M1