Table of Contents
Advertisement
V-5 PTZ Setup:
The MDR can support to connect with PTZ (Pan/Tilt/Zoom) camera and control via the IR remote
controller.
Enable all camera have same PTZ setting or use the CH1 ~ CH4 for difference PTZ
ALL CH:
setting with difference PTZ cameras;
Support totally 16 protocols, which including: Pelco-D, Pelco-P, DSCP, FastDome,
Protocol:
PIH 1016, PIH 1017, Pelco06, Pelco07, Pelco08, Pelco09, Pelco10, Pelco11,
Pelco12, Pelco13, Pelco14, Pelco15.
If no corresponding protocol in here, please contact with local distributor, we can
provide the technical support to add the special protocol if user can provide PTZ
details information;
Selectable with 1200, 2400, 4800, 9600
Baud Rate:
Can allow user defined from 01 to 63 PTZ ID
PTZ ID:
PTZ turning speed level from 01 to 04, which defined as 01 for slow, and 04 as
PTZ Speed:
fastest.
Can be test with corresponding camera with PTZ setting;
TEST:
Scroll to APPLY and press ENTER to save the new settings.
50
MDR Manual
Advertisement
Table of Contents
