Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TeleEye JN6204
Summary of Contents for TeleEye JN6204
- Page 1 User Manual JN6204 / JN6208 / JN6216 Yongh Please read this manual carefully for correct use of the product and preserve it for reference purposes Please read this manual carefully for correct use of the product and preserve it for reference purposes...
- Page 2 Notes Please read this user manual carefully to ensure that you can use the device correctly and safely. There may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice.
-
Page 3: Table Of Contents
AHD Hybrid DVR User Manual Contents Contents Introduction ........................1 1.1 Features..........................1 1.2 Front Panel Descriptions ....................2 1.3 Rear Panel Descriptions ....................3 1.4 Connections ........................5 Basic Operation ......................8 2.1 Startup and Shutdown ...................... 8 2.1.1 Startup ........................8 2.1.2 Shutdown ........................ - Page 4 AHD Hybrid DVR User Manual Contents Alarm ........................... 35 9.1 Sensor Alarm ......................... 35 9.2 Motion Alarm ........................ 36 9.3 Video Loss Alarm ......................38 9.4 Other Alarm ........................38 9.5 Alarm Out ........................39 9.6 Manual Alarm ........................ 39 P.T.Z ..........................
- Page 5 AHD Hybrid DVR User Manual Contents 14.5 Remote Playback & Backup ..................62 14.6 Remote System Configuration ..................65 14.7 Tools ..........................65 14.8 Remote Management ....................65 Appendix A FAQ ......................... 66 Appendix B Calculate Recording Capacity ..............70 Appendix C Compatible Devices ..................
-
Page 6: Introduction
AHD Hybrid DVR User Manual Introduction 1 Introduction 1.1 Features Live Surveillance Support VGA/HDMI output *Support AHD video input, the adjacent odd and even channels (such as Channel 1 and Channel 2, Channel 3 and Channel 4, etc.) must be connected to the same video source ( WD1 or AHD signal may be optional) *The models have no above requirement which support 1080P ... -
Page 7: Front Panel Descriptions
AHD Hybrid DVR User Manual Introduction 1.2 Front Panel Descriptions The following descriptions are for reference only. Type I: Name Descriptions When recording, the light is blue When access to network , the light is blue Power Power indicator, when connection , the light is blue Switch the resolution of the VGA/HDMI output Type II: Name... -
Page 8: Rear Panel Descriptions
AHD Hybrid DVR User Manual Introduction 1.3 Rear Panel Descriptions Here we only take a part of real panels for example to introduce their interfaces and connections. The interfaces and locations of the interfaces are only for references. Please take the real object as the standard. - Page 9 AHD Hybrid DVR User Manual Introduction Name Descriptions AUDIO IN Audio input; connect to audio input device, like microphone, pickup, etc AHD VIDEO IN 16CH AHD Video Inputs AUDIO OUT Audio output; connect to sound box RS485 Connect to keyboard or speed dome. A is TX+; B is TX- HDMI Connect to high definition display device Connect to monitor...
-
Page 10: Connections
AHD Hybrid DVR User Manual Introduction Name Descriptions AHD VIDEO IN 8CH AHD Video Inputs AUDIO OUT Audio output; connect to sound box CVBS CVBS video output; connect to monitor AUDIO IN Audio input; connect to audio input device, like microphone, pickup, etc Grounding ALARM OUT Relay output;... - Page 11 AHD Hybrid DVR User Manual Introduction Alarm Input: Alarm IN 1~16 are 16 CH alarm input interfaces. There are no type requirements for sensors. NO type and NC type are both available. The way to connect sensor and the device is as shown below: The alarm input is an open/closed relay.
- Page 12 AHD Hybrid DVR User Manual Introduction PTZ Connection There are two types of RS485 interfaces: （Type 1） （Type 2） Type 1: The P/Z interfaces are used to connect speed dome. K/B interfaces are used to connect keyboard. Type 2: The RS485 interfaces are not only used to connect speed dome but also to connect keyboard.
-
Page 13: Basic Operation
AHD Hybrid DVR User Manual Basic Operation Basic Operation 2.1 Startup and Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expending the life of your device. 2.1.1 Startup ①... - Page 14 AHD Hybrid DVR User Manual Basic Operation There are two kinds of remote controller. The interface of remote controller is shown as below. Button Function Switch off—to stop the device Power Button Record Button To start recording -/-- /0-9 Input number or choose camera Fn1 Button Unavailable temporarily Multi Button...
- Page 15 AHD Hybrid DVR User Manual Basic Operation Button Function Record manually Search To enter search mode MEUN To enter menu Exit To exit the current interface ENTER To confirm the choice or setup Direction button To move cursor in setup ZOOM To zoom in To set picture in picture...
-
Page 16: Using A Mouse
AHD Hybrid DVR User Manual Basic Operation remote, input device ID of the AHD Hybrid DVR to be controlled (Range from: 0-65535; the default device ID is 0) and press ENTER to confirm. ② You can check the device ID of a AHD Hybrid DVR from SetupBasicSystem interface. -
Page 17: Common Buttons
AHD Hybrid DVR User Manual Basic Operation Shift: Switch between lower case and upper case. ESC: Exit. 2.5 Common Buttons 【Default】 ：Restore the settings to the factory default setting. 【Apply】 ：Apply and save the settings. 【Copy】 ：Copy button. Click this button to copy the settings of one channel to other channels quickly. -
Page 18: Wizard Setup
AHD Hybrid DVR User Manual Wizard Setup 3 Wizard Setup The wizard will start once the device has loaded, which will guide you through some important settings of your device. You can follow its instructions to set. However, you can skip this wizard by clicking “Exit”... - Page 19 AHD Hybrid DVR User Manual Wizard Setup ④ Click “Next” button to complete the wizard setup.
-
Page 20: Live View
AHD Hybrid DVR User Manual Live View 4 Live View 4.1 Login You can login or log off the AHD Hybrid DVR system. Once logged off the user cannot do any other operation except changing the multi-screen display. The default username is “admin” and the default password is “123456”. Please input the default username and password for the first time to log in. - Page 21 AHD Hybrid DVR User Manual Live View Click the icon beside the screen display mode to display a channel select dialog. 6/8/13 channels can realize single channel big screen. Images can drag to any place to display in the live interface. Click Main Menu button to go to main menu interface.
-
Page 22: Sequence View
AHD Hybrid DVR User Manual Live View ② A software keyboard will pop up by clicking camera name area. Click the letters and (or) digital numbers on the keyboard to input the name you want to display in live image. ③... -
Page 23: Mask View
AHD Hybrid DVR User Manual Live View ⑤ Return to the live view interface. Right click to show the menu toolbar. Then enable Dwell button. If your device supports spot output and the spot ouput device has already been connected to the device , you should set spot ouput. -
Page 24: Add Ip Cameras
AHD Hybrid DVR User Manual Add IP Cameras 5 Add IP Cameras This chapter mainly introduces how to connect multiple IP cameras through AHD Hybrid DVR. Once you finish adding IP cameras, you can see the live images through the monitor of the AHD Hybrid DVR. - Page 25 AHD Hybrid DVR User Manual Add IP Cameras ③ Checkmark the searched devices and click “OK” button to return to the previous interface. Click “Apply” button and then the added devices will be listed in the device management interface. “Connected” status means connecting the device successfully and you will see the live image.
-
Page 26: Ip Camera Settings
AHD Hybrid DVR User Manual Add IP Cameras Click “Add” button to pop up a window as shown below. You need to check “Enable” ② box, select channel and manufacturer and manually input IP address, server port, username and password of this device. Note: If the AHD Hybrid DVR and the IP cameras you want to add are in WAN, the IP address of the IP camera input here must be WAN IP. -
Page 27: Record
AHD Hybrid DVR User Manual Record 6 Record Before recording, please format your disk first. Go to Main MenuDisk Management to access disk management settings. In this interface, you can format your disk. 6.1 Record Settings Go to Main MenuSetupRecordEnable to do record settings. ①... - Page 28 AHD Hybrid DVR User Manual Record Set up rate, resolution, quality, encode and max bit stream according to the actual situation. Then apply the settings. Resolution: The higher the resolution is, the clearer the image is. FPS: The higher the frame rate is, the more fluency the video is. However, more storage room will be taken up.
-
Page 29: Manual Record
AHD Hybrid DVR User Manual Record Checkmark camera name and time stamp. Click “Setting” button to set the position of the stamp. You can drag the camera name and time stamp at random positions. Refer to below figures: Before drag After drag ⑤... -
Page 30: Motion Based Recording
AHD Hybrid DVR User Manual Record You can also set week schedule by double clicking in the gridding area. This will take you to see a dialog box as below. Select a day and click “Add” button to schedule start time and end time. Then click ①... -
Page 31: Sensor Based Recording
AHD Hybrid DVR User Manual Record ④ Set schedule for motion alarm. The setting steps are similar to normal schedule recording (See Chapter 6.3 Schedule Recording for details). Note: The timelines of these two schedules (schedule for motion based recording and schedule for motion alarm) must match, otherwise you will not get the record in some time). - Page 32 AHD Hybrid DVR User Manual Record ④ Set schedule for sensor alarm. The setting steps are similar to normal schedule recording (See Chapter 6.3 Schedule Recording for details). Note: The timelines of these two schedules (schedule for sensor based recording and schedule for sensor alarm) must match;...
-
Page 33: Playback
AHD Hybrid DVR User Manual Playback 7 Playback You can playback the record by time, picture, event, file and bookmark search. 7.1 Playback Right click the mouse in the live view mode to pop up the menu toolbar. Then click the little triangle button beside button to set the playback time (eg. -
Page 34: Playback By Time Search
AHD Hybrid DVR User Manual Playback device (see Chapter 8 Backup for more details). 【Exit】: Exit the current interface. 【Move tool】: Click and hold this button. Then drag the mouse to move this toolbar. 7.2 Playback by Time Search ① ... -
Page 35: Playback By File Search
AHD Hybrid DVR User Manual Playback ② Select date and channels on the right hand side. A date with highlighted borderline indicates presence of data. ③ Checkmark Motion, Sensor or All accordingly. ④ Click Search button to display the searched event information in the event list box. Double check a certain record file to playback. -
Page 36: Playback By Picture Search
AHD Hybrid DVR User Manual Playback Go to Main MenuSetupRecordSnap as shown below. You can set auto snap here. ① Set resolution, image quality, snap time interval and snap number. ② Click “Apply” to save the settings. The system will automatically capture pictures according to the setup. - Page 37 AHD Hybrid DVR User Manual Playback ④ Once an alarm image has been identified, the user can double click the image to play recording.
-
Page 38: Backup
AHD Hybrid DVR User Manual Backup 8 Backup You can use the USB storage device (like U-disk, removable HDD, USB DVD writer) to do backup. Some models maybe support to back up by in-built DVD writer. There are two types of backup--Backup and Clip Backup. -
Page 39: Clip Backup
AHD Hybrid DVR User Manual Backup ④ In the backup information interface, you can check the relevant information of backup files, such as, storage type, save file type, etc. Then click “Start” button to start backup. Note: If the backup files are saved in DVR format, please check backup player. Only this player can play these files in DVR format. -
Page 40: Alarm
AHD Hybrid DVR User Manual Alarm 9 Alarm Alarm settings include sensor alarm, motion alarm, video loss alarm, other alarm and alarm out setting. 9.1 Sensor Alarm Some models may support this function. Operate the following steps to configure sensor based alarm: ①... -
Page 41: Motion Alarm
AHD Hybrid DVR User Manual Alarm Buzzer: If selected, the local buzzer would be activated on an alarm. Show Full Screen: If selected, there will pop up the chosen channel on the monitor on an alarm trigger. To Alarm Out: If selected, this would trigger external relay output on an alarm. Email: If selected, the AHD Hybrid DVR will send an email alert to the preconfigured email address in case of a sensor based alarm from the particular input. - Page 42 AHD Hybrid DVR User Manual Alarm during this period it is considered it as continuous movement, otherwise it will be considered as a single motion. ③ The setup steps of motion trigger are similar to “Alarm Handling” (See Sensor Alarm Handling setting for more details).
-
Page 43: Video Loss Alarm
AHD Hybrid DVR User Manual Alarm ⑧ Go to Schedule tab. The setting steps for schedule for motion based alarm are similar to normal schedule setup (see Chapter 6.3 Schedule Recording for more details). 9.3 Video Loss Alarm This device can be set up to detect video loss. The setting steps are as follows: ①... -
Page 44: Alarm Out
AHD Hybrid DVR User Manual Alarm 9.5 Alarm Out To set up alarm out: Some models may not support this function. Please checkmark buzzer and set buzzer time. ① Go to Main MenuSetupAlarmAlarm Out. Input relay name and select hold time. ②... -
Page 45: T.z
AHD Hybrid DVR User Manual P.T.Z 10 P.T.Z Before you control the speed dome, please make sure the speed dome is well connected to the device. P.T.Z configuration includes two submenus: serial port and advanced. Serial port settings are as follows: ①... - Page 46 AHD Hybrid DVR User Manual P.T.Z To set up preset: In the Advanced interface, click preset “Setting” button to see a dialog box. ① ② In the preset setting tab, enable preset, set the preset name and then click preset “Setting”...
- Page 47 AHD Hybrid DVR User Manual P.T.Z ③ Select a cruise line and click Setup button to see a dialog box as below. ④ Click Add icon to set the speed and time of preset point. Select a preset point and then click Delete icon to delete that preset point.
-
Page 48: Network Settings
AHD Hybrid DVR User Manual Network Settings 11 Network Settings Network Settings includes six submenus: network, sub stream, email, server, NAT and other settings. Network settings must be configured if the device is used for monitoring over network. 11.1 Network To set up network: ①... -
Page 49: Sub Stream
AHD Hybrid DVR User Manual Network Settings 11.2 Sub Stream To set up sub stream: ① Go to Main MenuSetupNetworkSub Stream interface. ② Select fps, resolution, quality, encode and max bit rate. Select “All” to set the same settings for all channels. ③... -
Page 50: Nat
AHD Hybrid DVR User Manual Network Settings ② Check the IP address and port of the transfer media server in the ECMS/NVMS. The default server port for auto report is 2009. If it is modified, please go to the transfer media interface to check. - Page 51 AHD Hybrid DVR User Manual Network Settings If your device is set to use PPPoE as its default network connection, you may set up DDNS to be used in connection. The setting steps are as follows: Check “DDNS” and select “www.dvrdydns.com” in DDNS Type column as shown ①...
- Page 52 AHD Hybrid DVR User Manual Network Settings Domain name Registration （Take www.dvrdydns.com for example） ① Input www.dvrdydns.com in the IE address bar to visit its website. Then click “Registration” button to register as shown below. ② Create domain name. ③ After you successfully request your domain name, you will see your domain in the list.
-
Page 53: Other Settings
AHD Hybrid DVR User Manual Other Settings 12 Other Settings 12.1 Basic Configuration Basic configuration includes three sub menus: system, date & time and DST. 12.1.1 System ① Go to Main MenuSetupBasicSystem interface. ② In this interface you can set up the device name, device ID, video format, max network users, VGA resolution, language and so on. -
Page 54: Time & Date
AHD Hybrid DVR User Manual Other Settings Show Wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the user to do basic setup. No Image When Logout: If selected, there will be no image showing when logging out. 12.1.2 Time &... -
Page 55: Reset
AHD Hybrid DVR User Manual Other Settings 12.2.1 Reset Restore the device to factory default settings. 12.2.2 Import/Export You can export the data files into mobile storage devices as backup function, and then import specified data files from mobile storage device to the AHD Hybrid DVR. 12.2.3 Block/Allow List Here authorized user can prohibit computer users within a certain IP address range from accessing to the AHD Hybrid DVR or allow computer users within a certain IP address range to... -
Page 56: Device Management
AHD Hybrid DVR User Manual Device Management 13 Device Management 13.1 User Management 13.1.1 Add, Delete & Modify User To add user and set up user authority: ① Go to Main MenuSetupUsers. ② Click Add button to display a dialog box as below. ③... -
Page 57: Online Users
AHD Hybrid DVR User Manual Device Management ⑥ Click OK to save the setting. To delete user: ① Go to Main MenuSetupUsers interface. Select the added user you want to delete and then click “Delete” button. ② To modify user: ①... -
Page 58: Logoff
AHD Hybrid DVR User Manual Device Management 【Disconnect】: Set the time, choose the online user and click “Disconnect” button. Then this user will be prohibited accessing the device within the set time. After that time, the user can access the device by clicking “Refresh” button or logging in again. 13.1.3 Logoff If you want to change the login account, you can click Main MenuLogoff. -
Page 59: Shutdown
AHD Hybrid DVR User Manual Device Management Click “System” to check the hardware version, MCU version, kernel version, device ID, etc. Click “Event” to search for events like motion, sensor and video loss. The utility provides an interface to have a date based and a channel based search. This report can further be saved on a USB flash drive as an html file using the export button. -
Page 60: Remote Surveillance
AHD Hybrid DVR User Manual Remote Surveillance 14 Remote Surveillance 14.1 IE Remote Surveillance by NAT In order to access the device remotely over LAN/WAN, the network should be set up accordingly. 14.1.1 NAT Settings ① The AHD Hybrid DVR shall be powered on and connected to the network. ②... -
Page 61: Ie Remote Surveillance Via Lan & Wan
AHD Hybrid DVR User Manual Remote Surveillance 14.2 IE Remote Surveillance via LAN & WAN In order to view the AHD Hybrid DVR from a network it may be connected to a LAN/WAN or internet. The network setup should be done accordingly. 14.2.1 LAN ①... -
Page 62: Remote Surveillance Through Apple Pc
AHD Hybrid DVR User Manual Remote Surveillance name and password received from your ISP. Next, click “Apply”. The AHD Hybrid DVR will connect to the server and would give a confirmation message. ② When accessing the remote interface of the AHD Hybrid DVR, user can input WAN IP to access directly (user can go to Main MenuInformationNetwork interface to check IP address). - Page 63 AHD Hybrid DVR User Manual Remote Surveillance ② Go to Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC. ③ After acquiring the IP address, Subnet Mask and so on, please go to Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC.
-
Page 64: Wan
AHD Hybrid DVR User Manual Remote Surveillance Input the name and password of Apple PC and then click “OK” to install this Active X ⑥ control. ⑦ After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit”... - Page 65 AHD Hybrid DVR User Manual Remote Surveillance Symbol and function definitions: Channel indicator Screen display mode Volume Start recording Snapping picture Start talking Start IE recording Playback Master/sub stream status Color PTZ control button to start recording. The record file will be saved in user’s PC. Note: Click Screen display mode: Click the...
- Page 66 AHD Hybrid DVR User Manual Remote Surveillance Buttons Description to rotate the dome upwards to rotate the dome diagonally up-left to rotate the dome diagonally up-right to rotate the dome downwards to rotate the dome diagonally down-left rotate the dome diagonally down-right to rotate the dome towards left to rotate the dome towards right...
-
Page 67: Remote Playback & Backup
AHD Hybrid DVR User Manual Remote Surveillance Zoom in: Single channel large screen electronic amplification. Click the channel which needs to be zoomed. Right click to select zoom in button to zoom in the image. Double click or right click to exit. 14.5 Remote Playback &... - Page 68 AHD Hybrid DVR User Manual Remote Surveillance The highlight date in the area ② indicates recorded data. Select the date in area ② and record channels in area ③. Click “Search” button. The record data will be displayed in the data information list box.
- Page 69 AHD Hybrid DVR User Manual Remote Surveillance Go to SearchFile Management interface. Select highlighted date and channels. Click “Search” button to search the recorded files. Lock: Select certain file item in the file list box and then click “Lock” button to lock this file that ca not be deleted or overlaid.
-
Page 70: Remote System Configuration
AHD Hybrid DVR User Manual Remote Surveillance Select backup files and click “Browse” button to set the save path. Then click “Backup” ② button to start backup. The backup files will be saved on user’s PC. 14.6 Remote System Configuration You can do remote setup of the device which includes functions like basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. -
Page 71: Appendix A Faq
AHD Hybrid DVR User Manual Appendix Appendix A FAQ Q1. Why does the AHD Hybrid DVR start abnormally even after connecting to the power? a. The power adapter could have gone bad. Please change a new power adapter. b. The power from the adapter may be not enough for operating the AHD Hybrid DVR. Please use the power adapter supplied along with the AHD Hybrid DVR. - Page 72 AHD Hybrid DVR User Manual Appendix b. After connecting the mouse, allow the AHD Hybrid DVR to detect the mouse for seconds. If not detected, try restarting the AHD Hybrid DVR. c. The mouse may be incompatible or faulty. Please change a mouse. Q8.
- Page 73 AHD Hybrid DVR User Manual Appendix Click the password or the input box to pop up a small keyboard. Please select characters to be input (the initial password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote controller.
- Page 74 AHD Hybrid DVR User Manual Appendix Q14. How to play the backup file? Insert your USB device where the backup files are saved in the USB port of PC. If your files are saved in DVR format, you must have already downloaded the backup player box before doing backup.
-
Page 75: Appendix B Calculate Recording Capacity
AHD Hybrid DVR User Manual Appendix Appendix B Calculate Recording Capacity You can calculate the size of hard disk according to the storage time and AHD Hybrid DVR recording settings. The formula is as follows in full frame rate condition. Used space per hour (MB/h) = Bitrate (kbps) ÷... -
Page 76: Appendix C Compatible Devices
AHD Hybrid DVR User Manual Appendix Appendix C Compatible Devices Compatible USB drive after test Brand Capacity Netac Kingston 2GB/4GB/8GB/16GB/32GB Aigo Smatter vider SanDisk 4GB/8GB/16GB/32GB Compatible SATA CD/DVD writers after test Brand Model TECLAST GH22NP20/TL-22XD BENQ DW220S-0K4 LITEON DH—20A6S01C LITEON DH-20A4P02C SAMSUNG TS-H653B... -
Page 77: Appendix D Dvd Writer Installation
AHD Hybrid DVR User Manual Appendix Appendix D DVD Writer Installation Some models may support this function. ① Loosen the lock screws in the front panel to remove the barrier. ② Put the DVD writer onto the bottom of the case. ③... - Page 78 450011000659...
Need help?
Do you have a question about the JN6204 and is the answer not in the manual?
Questions and answers