TeleEye RX538 Quick Start Guide Page 2 Content 1. Introduction 1.1 Front Panel Description..............3 1.2 Rear Panel Description..............3 2. Hardware Installation 2.1 Hard Disk Installation................4 2.2 Mobile Data Modem Installation............4 2.3 Wireless LAN Adaptor Installation.............5 2.4 Video Installation................5 3. Operation 3.1 Live Operation Through Mobile Data Modem........6...
TeleEye RX538 Quick Start Guide Page 3 1. Introduction 1.1 Front panel description Power LED 1.2 Rear panel description 9 10 Item Name Function Alarm IN/ Relay OUT External alarm input and relay output DC12-24V Connecting 12-24 V DC input...
TeleEye RX538 Quick Start Guide Page 4 2. Hardware Installation 2.1 Hard Disk Installation Step 1: Remove screws on left cover. Step 2: Open the left cover. Step 3: Insert the Hard Disk into the SATA port. Step 4: Mount the Hard Disk with given screws and rings.
TeleEye RX538 Quick Start Guide Page 5 2.3 Wireless LAN Adaptor Installation CAT5 Ethernet Cable Wireless LAN adaptor Step: Connect CAT5 Ethernet Cable to the Wireless LAN adaptor. 2.4 Video Installation Fix Camera Step: Connect the fix camera to the VIDEO IN with DB15 Video Cable ...
TeleEye RX538 Quick Start Guide Page 6 3. Operation 3.1 Live Operation Through Mobile Data Modem There are two different modes : Start up mode and SMS/ Event mode to operate with mobile data modem. Step 1: Make sure the mobile service provider support streaming at Internet connection.
TeleEye RX538 Quick Start Guide Page 7 Step 7: Enter username and password to login account if mobile service provider require username and password authentication. Step 8: Click [Test] to test the configuration. Step 9: Click [Apply] to save all the settings.
TeleEye RX538 Quick Start Guide Page 8 3.3 Recording There are two methods to record the videos: 1. General Setting 2. Schedule Setting General Setting Step 1: Click [Remote site] at the left top on main page [Site settings...] [Recording].
Page 9
TeleEye RX538 Quick Start Guide Page 9 Schedule Setting Step 1: Select “Scheduled recording” from the left panel. Then click [Add]. Step 2: Set the schedule and frame rate, and choose the camera's recording type. Then click [OK]. Step 3: If needed, select a schedule and click [Edit] to change the settings.
TeleEye RX538 Quick Start Guide Page 10 Step 5: If needed, select a schedule and click [Copy] to duplicate the schedule. Then Choose the scope and weekdays to copy. Then click [OK]. Step 6: After setting, click [Apply] to save all settings.
Need help?
Do you have a question about the RX 538 and is the answer not in the manual?
Questions and answers