Installing The Printer Driver By Creating A Printer Port - Olivetti d-Color MF551 Printing Manual

4.1 Windows Vista/Server 2008

Installing the printer driver by creating a printer port

0 Installing the driver to Windows Vista/Server 2008-based computers requires the administrator
authority.
0 Since the printer is searched for during the installation, be sure to connect the machine to the network
before turning it on.
1
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2
Press the [Start] key, and then select "Control Panel".
3
Click "Printer" under "Hardware and Sound".
The "Printers" window appears.
% When "Control Panel" is displayed in Classic View, double-click "Printer".
4
Click [Add a printer] on the toolbar.
The "Add Printer" window appears.
5
Click "Add a local printer".
The page for selecting a printer port appears.
6
Click "Create a new port", and then select the port type.
% To use the LPR/Port9100 protocol, select "Standard TCP/IP Port".
% To use the SMB connection, select "Local Port".
7
Click [Next].
8
Specify the IP address and port.
% To use the LPR/Port9100 protocol, select "TCP/IP Device", and then enter the IP address.
% To use the SMB connection, enter "\\NetBIOS name\print service name" in the "Port Name" box.
% Enter the same NetBIOS name and print service name specified in "Print Setting" in "SMB Setting".
9
Click [Next].
% If the "Additional Port Information Required" page appears, go to Step 10.
% If the "Install the printer driver" page appears, go to Step 13.
10
Select "Custom", and then click [Settings].
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port9100, select "RAW", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
% If both LPR and Port9100 are enabled on the printer, the printer driver is connected to the machine
using LPR.
12
Click [Next].
The "Install the printer driver" page appears.
13
Click [Have Disk].
14
Click [Browse].
15
Select a desired printer driver folder in the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver, XPS driver and fax driver
16
Click [OK].
The "Printers" list appears.
d-Color MF651/551
4
4-5