Carrier 19XRV Start-Up, Operation And Maintenance Instructions Manual page 33

To access this display from the ICVC default screen:
1. Press MENU .
2. Press .
SERVICE
3. Scroll down to highlight CONTROL ALGORITHM STATUS
4. Press SELECT .
5. Scroll down to highlight WSMDEFME
6. Press SELECT .
DESCRIPTION
WSM Active?
Chilled Water Temp
Equipment Status
Commanded State
CHW setpt Reset Value
Current CHW Set Point
NOTE: All variables with CAPITAL LETTER point names are available for CCN read operation; forcing shall not be supported on maintenance
screens.
To access this display from the ICVC default screen:
1. Press MENU .
2. Press SERVICE .
3. Scroll down to highlight EQUIPMENT CONFIGURATION
4. Press SELECT .
5. Scroll down to highlight
NET_OPT
6. Press SELECT
DESCRIPTION
Loadshed Function
Group Number
Demand Limit Decrease
Maximum Loadshed Time
CCN Occupancy Config:
Schedule Number
Broadcast Option
Alarm Configuration
Re-Alarm Time
Alarm Routing
NOTE: No variables are available for CCN read or write operation.
Table 4 — ICVC Display Data (cont)
EXAMPLE 14 — WSMDEFME DISPLAY SCREEN
.
.
STATUS
0/1
0.0-99.9
0/1
XXXXXXXX
0.0-25.0
0.0-99.9
EXAMPLE 15 — NET_OPT DISPLAY SCREEN
.
.
STATUS
0-16
0-60
0-480
3-99
0-1
0-1440
xxxxxxxx
UNITS
NO/YES
DEG F
OFF/ON
TEXT
^F
DEG F
UNITS
ldsgrp
% ldsdlta
MIN maxshed
occ_num
DSABLE/ENABLE occbrcst
MIN retime
routing
33
POINT
WSMSTAT
CHWTEMP
CHWRST
CHWRENA
CHWRVAL
CHWSTPT
POINT DEFAULT
0
20
60
3
DSABLE
30
10000000