Motorola MC45 Integrator Manual page 35

Align the lip of the cup with the slot on the front of the cradle. Ensure that the cup is positioned within the
2.
Slot Alignment Tabs.
Slide the lip into the cup slot and rotate the cup until it is flat on the cradle base.
3.
Using a Phillips screwdriver, secure the cup to the charger base using the two screws provided with the
4.
cup.
Cup lip
Charger Cup installation
Figure 2-5
Four Slot Battery Charger Cup Adapter installation
Figure 2-6
Each slot on the cradle base must have a cup installed.
5.
Repeat for each additional cup.
6.
Charging Cup
Four Slot Battery
Charger Cup Adapter
Accessories 2 - 7