Synchronization With A Windows Embedded Handheld 6.5.3 Device - Motorola MC45 Integrator Manual

ActiveSync Window
Figure 3-2
NOTE Assign each mobile computer a unique device name. Do not try to synchronize more than one mobile
computer to the same name.
In the ActiveSync window, select File > Connection Settings. The Connection Settings window
2.
appears.
Connection Settings Window
Figure 3-3
Select the appropriate check box for the type of connection used.
3.
Select the Show status icon in Taskbar check box.
4.
Select OK to save any changes made.
5.

Synchronization with a Windows Embedded Handheld 6.5.3 Device

NOTE When a mobile computer with Windows Embedded Handheld 6.5.3 is connected to a host computer and
an ActiveSync connection is made, the WLAN radio (if applicable) is disabled. This is a Microsoft security
feature to prevent connection to two networks at the same time.
To synchronize with a Windows Embedded Handheld 6.5.3 device:
If the Get Connected window does not appear on the host computer, select Start > All Programs >
1.
Microsoft ActiveSync.
ActiveSync 3 - 3