Four Slot Battery Charger Installation; Power Connection; Charging Temperature - Motorola MC45 Integrator Manual

2 - 8 MC45 Integrator Guide
Multi Slot Universal Charge Only Cradle with Charger Cups and Four Slot Battery Charger Cup
Figure 2-7
Adapter installed

Four Slot Battery Charger Installation

To install the Four Slot Battery Charger:
Align the four mounting holes on the bottom of the Four Slot Battery Charger with the four studs on the
1.
Four Slot Battery Charger Cup Adapter.
Place the Four Slot Battery Charger onto the Four Slot Battery Charger Cup Adapter and slide down until it
2.
locks into place.

Power Connection

Plug the power supply connector into the right power input jack on the back of the Multi Slot Universal Charge
Only Cradle base. The left power input jack is used for future expansion.
Figure 2-8 Multi Slot Universal Charge Only Cradle Power Connection

Charging Temperature

Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC45.
To accomplish this, for small periods of time, the MC45 or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The MC45 or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See
Blank Slot Cover
Table 2-2 for charging status indications.