Adjustment Instructions - Keys Fitness CG1HR Owner's Manual

Adjustment Instructions

How to adjust the stride length
The CG1HR is equipped with a manual stride length adjustment system. This system allows the
user to select a stride length between 17" and 25".
To change the stride length:
Step 1:
Loosen both knobs (A & B) by turning them counter-clockwise, making sure not to fully detach
knob B from the unit.
Step 2:
While holding onto knob B, pull knob A outwards to disengage locking pin and hold it outwards.
Slide the adjustment system either up or down, until desired stride length is achieved, and
release knob A to engage locking pin.
Note: The indicator will display the current stride length of the unit.
Step 3:
Tighten both knobs (A & B) by turning them clockwise.
Repeat steps 1-3 for the other side.
WARNING: To prevent personal injury, make sure that both the right and left sides of
the unit are set to the same stride length before working out.
Step 2
Step 1 Step 3
Indicator
Hold
B
A
B
A
19