Pioneer CDJ-800MK2 Service Manual page 87

5
Red
A display of TOUCH/RELEASE and TEMPO slider reading value
TOUCH/RELEASE and the TEMPO slider reading value is displayed in the form of a bar in 7G area of FL display part.
CUE Area :
Playing Address : If TEMPO slider knob is moved to + side, the number of display dots will increase.
3.Check mode of the load of JOG dial
It is the mode which judges the load (light/-- heavy) numerically when rotating JOG dial.
If it goes into the above-mentioned check mode of button and display function of the display part, a TOUCH/RELEASE knob is
made in the maximum (right-hand side) and arbitrary buttons are pushed once, it will become JOG load check mode and top speed
and time will displayed on a dot-matrix part.
0.0: 0m
Max speed Time (msec)
It goes into this mode, and a number will be displayed if JOG dial is turned with sufficient vigor.
the rotation direction -- right-handed rotation and left-handed rotation -- either is O.K.
For example, when displayed as "8.6: 115", the following contents are shown, respectively.
8.6 = What time speed came out by the highest. (The time of turning one rotation in 1.8 seconds is made into 1 time.)
115 = Time taken for rotation to fall by 1.5 times from 3 times (msec)
It is necessary to make it rotate top speed to 7.0 or more times to measure the rotation fall time required.
When it carries out continuously several times, the time which took the average with a part for greatest ever 4 time is
displayed 2nd henceforth. Measurement which absorbed variation can be performed by performing this.
5
6
1
2
3
If a TOUCH/RELEASE knob is turned to the right, the number of display dots will increase.
6
7
• Unspecified color : White
CDJ-800MK2
7
8
5
Blue
4
8
A
B
C
D
E
F
87