Pioneer CDJ-800MK2 Service Manual page 113

5
Notes on Replacement
Notes on replacing the JFLB Assy
JFLB Assy
Be careful not to pinch the flexible
cable coming from the sheet SW
during assembly.
Apply tape to the circumference of the JOG FL
section to secure it.
Adhere a reinforcing polycarbonate sheet to the surface.
Places to Roller Assys A and B
SW ring
5
6
×9
Roller A Assy
×8
Roller B Assy
JOG holder
6
7
Notes on replacing the Sheet SW
Place to adhere the Sheet SW
Notes:
1. Be careful not to warp the sheet SW.
2. Remove any dirt on the JOG holder to which the sheet SW
is to be adhered. If some adhesive for the old sheet SW
remains on the JOG holder, completely remove it with a cloth
moistened with alcohol.
3. Do NOT place the sheet SW so that it is mounted on the
rib of JOG holder.
4. When adhering the sheet SW, be careful not to trap air
bubbles in it. If air bubbles are formed, remove the sheet SW
and adhere a new sheet SW.
Do NOT reuse the removed sheet SW.
5. When making a connection, be sure to first release the lock
of the connector then securely relock the connector after
making the connection.
Sheet SW
Rib
Place to adhere the SW cushions HH48/2
Adhere the cushions to the right and left of the engraved
arrows (←) (12 positions in total) on the sheet SW.
SW cushion HH48/2 Engraved arrow
Sheet SW
CDJ-800MK2
7
8
A
B
C
JOG holder
D
E
SW cushion HH48/2
F
113
8