Table of Contents
Advertisement
Basic Operation
Writing Images/Audio Sound
to CDs, DVDs and Other
Media (Export) (continued)
Deleting Temporary Files (Operation on
the Unit)
1
Select the temporary files you want to delete
from the data list.
2
Click the [Erase Sel Data] button
A [YES] or [NO] message asking you whether to delete the selected
data appears. Select AYESB.
Deleting Data from a CD-RW (Operation on
the Unit)
1
Insert the CD-RW
● The [Erase RW] button is AenabledB.
2
Click the [Erase RW] button
● A [YES] or [NO] message asking whether you want to
delete data in the RW appears. Select AYESB.
Note :
● You cannot perform other operations while data is being written
to a CD/DVD.
● Recorded images may be omitted during writing to the CD/DVD
(temporary recording error).
● Do not display the Burn CD/DVD screen during export.
● Do not connect the CD/DVD drive while a media is inserted.
● Do not disconnect the CD/DVD drive while the Burn CD/DVD
screen is displayed.
● If media is not detected, restart the Burn CD/DVD screen.
50
Writing Data to a USB Memory Device
(Operation on the Unit)
Insert the USB memory device that you wish to export data to into
VR-N1600U/VR-N1600E/VR-N900U, and perform the same
procedures for [Burning a CD/DVD] from Steps 1 to 9. (A Page 47)
1
Specify the export destination
● To export to a USB memory device, select [USB].
[USB] Check
Button
2
2
Click [Export]
● Export begins.
Advertisement
Table of Contents
