Table of Contents
Advertisement
Other Settings
Item
B
Day and Time Properties
Automatically
synchronize with an
Internet server
Server
NTP Polling Interval
Date
Time
Time Zone
C
Volume Properties
Device Volume
D
LOAD configuration
E
SAVE changes
F
CANCEL changes
Preset Values
Select check box
● Do not select
check box
^
^
^
● VR-1600U:
(GMT-05:00)
Eastern Time
● VR-1600E:
(GMT) Greenwich
Mean Time
● Center position
^
^
^
To synchronize the time with the Internet time server or to specify the date and
time manually, click [Update Now].
Select this check box to synchronize the time with the Internet time server.
Note :
● You cannot specify the date and time manually when this box is selected. The
settings in the boxes cannot be changed.
● The date and time properties are not enabled until you have clicked the
[Update Now] button.
● Changing the time setting may prevent normal playback of recordings made at
the same time as a result.
● Changing the ATimeB field of the time setting when operations are in progress
may prevent normal display of live images. In this case, reboot this unit.
Enter the address of the Internet time server.
Note :
● Connect the time server to the LAN2 network.
For specifying the time interval (in minutes) for synchronizing with the Internet
time server.
Enter this field when you are specifying the date manually.
Memo :
● The [Day and Time Properties] settings are not enabled until you have clicked
the [Update Now] button.
● Changing the time setting may prevent normal playback of recordings made at
the same time as a result.
● Changing the AhourB value of the hour/minute/second setting when operations
are in progress may prevent normal display of the live images. In this case,
reboot this unit.
For specifying the time zone.
Note :
● Make sure that the date and time that you specify does not overlap with any
previous recorded data.
● If the specified time zone is incorrect, the system may not run at the correct
time after synchronizing with the Internet time server.
● When the time zone is altered, press the [LIVE/BROWSE] while holding down
the [FUNCTION] button to reboot the NVR Viewer.
Adjust the volume using the slider bar.
Reads the preset configuration files and displays them on the screen.
Exits after entries and the selected content are configured to the system.
Manual update of time is disabled. To update the time manually, go to the [Day
and Time Properties] item C.
Exits without saving all entries and selected settings.
Description
75
Advertisement
Table of Contents
