JVC LST0728-001C Instructions Manual page 82

Applications
Main Menu List (continued)
OS Setting (continued)
When specifying LAN2 (Intranet) settings
Item
ANetwork adapter
interface name
(continued)
Obtain an IP
address
automatically
IP address
Subnet Mask
Default Gateway
Perferred DNS
Server
Alternate DNS
Server
Host Name
DNS Domain Name
When specifying analog camera network settings (VR-N900U only)
Item
ANetwork adapter
interface name
(continued)
Obtain an IP
address
automatically
IP address
Subnet Mask
Default Gateway
Perferred DNS
Server
Alternate DNS
Server
Host Name
DNS Domain Name
Note :
● In VR-N900U, analog input circuitry is considered as a network encoder (IP video server) and the IP address is set to A192.168.201.12B by
default.
● The IP address of the analog camera network for VR-N900U is set to A192.168.201.253B by default. Do not change the IP address. Doing so
may cause the system to malfunction.
74
Preset Values
VR-1600/VR-N900:
Intel 8225xER PCI
Adapter
VR-N1600U/E(A):
Realtek RTL8168C(P)/
8111C(P) PCI-E Gigabit
Ethernet NIC#2
Select check box
● Do not select check
box
● 192.168.1.253
● 255.255.255.0
● 192.168.1.254
● 0.0.0.0
● 0.0.0.0
VR-N1600U/E :vr-n1600
VR-N900U :vr-n900
^
Preset Values
Enc Board Bus Master
Driver
Select check box
● Do not select
check box
● 192.168.201.253
● 255.255.255.0
● 0.0.0.0
● 0.0.0.0
● 0.0.0.0
● vr-n900
^
Settings when you are using LAN2 (Intranet).
Memo :
● To specify an IP address other than the default value, consult your system
administrator.
● If the host name is changed, you need to add a new Windows user in [User
Administration] under [Image Server Setting]. (A Page 118)
● Do not set the default gateway for both the camera network and Intranet on
the [OS Setting] screen. Doing so may cause the system to malfunction.
Settings when you are using an analog camera network.
Memo :
● To specify an IP address other than the default value, consult your system
administrator.
● If the host name is changed, you need to add a new Windows user in [User
Administration] under [Image Server Setting]. (A Page 118)
● Do not set the default gateway for both the camera network and Intranet on the
[OS Setting] screen. Doing so may cause the system to malfunction.
Description
Description